RouterOS v6.22  candidate special
اطلقت شركة ميكروتيك النسخة الجديدة
تحمل الرقم 6.22
الجديد فى النسخة

What's new in 6.22 (2014-Nov-11 14:46):

*) ovpn - added support for null crypto;
*) files - allow to remove empty disk folders;
*) sntp - fix problems with dns name resolving failures that were triggering
    system watchdog timeout;
*) eoip/eoipv6/gre/gre6/ipip/ipipv6/6to4 tunnels have new features:
   tunnels go down when no route to destination;
   tunnels go down for 1 minute when transmit loop detected, warning gets logged;
   new keepalive-retries setting;
   keepalives enabled by default for new tunnels (10sec interval, 10 retries);
*) improved connection-state matcher in firewall - can match multiple states in one rule, supports negation;
*) added connection-nat-state matcher - can match connections that are srcnatted,dstnatted or both;
*) 100% CPU load caused by DNS service fixed;
*) 100% CPU load caused by unclassified services fixed;
*) 6to4 tunnel fixed;
*) new RouterBOOT firmware for Metal 2SHPn to improve wireless stability;

 

mipsbe
CRS series, RB4xx series, RB7xx series, RB9xx series, RB2011 series, SXT, OmniTik, Groove, METAL, SEXTANT

 
 حمل ...........هنـــــــــــــا
 
x86
PC / X86, RB230 series


ppc
RB3xx series, RB600 series, RB800 series, RB1xxx series


mipsle
RB1xx series, RB5xx series, RB Crossroads


tile
CCR series


ALL
All system downloads in one torrent file


واعلنوا عن توافر نظام الجديد للتحكم فى الوايرليس

We have CAPsMAN v2 ready for testing.
wireless-cm2-6.22rc-tile.npk
wireless-cm2-6.22rc-mipsbe.npk
wireless-cm2-6.22rc-x86.npk
wireless-cm2-6.22rc-ppc.npk
wireless-cm2-6.22rc-mipsle.npk

Note: CAPsMAN v2 is NOT compatible with current CAPsMAN v1 (CAPsMAN v1 CAP devices will not be able to connect to CAPsMAN v2 and CAPsMAN v2 CAP devices will not be able to connect to CAPsMAN v1). It means that both CAPsMAN and CAP devices should have wireless-cm2 package installed in order to make CAPsMAN v2 system to work. If you want to try out the CAPsMAN v2 upgrade all the CAPs and the CAPsMAN to latest RouterOS version and install wireless-cm2 package.

CAPsMAN v2 features:

    CAPsMAN automatic upgrade of all CAP clients (configurable)
    improved CAP<->CAPsMAN data connection protocol
    added "Name Format" and "Name Prefix" setting for Provision rules
    improved logging entries when client roams between the CAPs
    added L2 Path MTU discovery

Upgrade options from v1 to v2:
Option1: Install a new temporary CAPsMAN v2 router in same network where the current CAPsMAN router is and start upgrading CAPs with wireless-cm2 package. All CAPs with the v2 will connect to the new temporary CAPsMAN v2 router. After every CAP is upgraded to v2, upgrade your current CAPsMAN to v2 and then turn off the temporary CAPsMAN v2 router.
Option2: Upgrade your CAPs and then CAPsMAN to v2 at the same time. In this case you could have little more downtime unless you schedule all the CAPs to reboot/install at the same time.


إرسال تعليق

 
Top